Lower Die Automatic Entry FPC PCB Punching Machine With Exited Slitting Method
Lower Die Automatic Entry & Exited Slitting Method PCBA/FPC Punching Machine ZM10T
1.High Efficiency. FPCs can be divided into 6 to 8 pieces in one minute.
2.The surface of the product is flat and uniform.
3.Low noise, no dust, thus reducing environment pollution.
4.Low Energy, the main power of consumption is compressed air.
5.Low labor intensity for employee.
6.Adopt the lower die automatic entry and exit slitting method, which is protected by both grating and safety door. The operator is very safe to operate it.
|1. Machine Exterior Sepecifications||Machine Name||FPC Punch Cut Machine|
|2. Machine Supply Requirements||Power Supply||AC220V 200W|
|Enviroment Required||Clean and dry environment ,Avoid moisture or high temperature environment|
|Working Pressure/Pipe Dia.||>0.6MP /6mm|
|Minimum distance of part from cutting position||≥＝0.5mm|
|Max.Cutting Length||300*360mm / 300*360mm / 350*600mm(Can customized larger size)|
|FPC Cutting Position||Don’t allow components to cross above the cutting position|
|Position Hole Required||FPC has4 holes at least and extra one foolproof hole|
|Max.height of the FPC Components||Obverse max.height is: 20mm front max.height is 35mm|
|3. Machine Software Part||PLC||Mitsubishi/Zhongyan PLC|
|Paramenters Setting||Can set the punch cut times through touch screen,and the maintenance time of the cutter time etc.|
|Storage Module||Can store 50 sets of programs|
|Operating System||Chinese and English operation interface|
|Touch Screen||WEINVIEW 7inch Touch Screen|
|Fiber Optic Sensor||Daochuan Sensor|