0.6MP PCB Punching Machine
830*730*2100MM Computer White PCBA/FPC Punching Machine for Punch Cut ZM10T
ZM10T is a PCBA/FPC Punching Machine. It's a high- efficiency product that it can divided PCBs into 6-8 pieces in one minute. It has user-friendly surface, lower noise, nodust, low energy and low labor.
1.High Efficiency. FPCs can be divided into 6 to 8 pieces in one minute.
2.The surface of the product is flat and uniform.
3.Low noise, no dust, thus reducing environment pollution.
4.Low Energy, the main power of consumption is compressed air.
5.Low labor intensity for employee.
6.Adopt the lower die automatic entry and exit slitting method, which is protected by both grating and safety door. The operator is very safe to operate it.
|1.Machine Exterior Sepecifications||Machine Name||FPC Punch Cut Machine|
|2.Machine Supply Requirements||Power Supply||AC220V 200W|
|Enviroment Required||Clean and dry environment ,Avoid moisture or high temperature environment|
|Working Pressure/Pipe Dia.||>0.6MP /6mm|
|Minimum distance of part from cutting position||≥＝0.5mm|
|Max.Cutting Length||300*360mm / 300*360mm / 350*600mm(Can customized larger size)|
|FPC Cutting Position||Don’t allow components to cross above the cutting position|
|Position Hole Required||FPC has4 holes at least and extra one foolproof hole|
|Max.height of the FPC Components||Obverse max.height is: 20mm front max.height is 35mm|
|3.Machine Software Part||PLC||Mitsubishi/Zhongyan PLC|
|Paramenters Setting||Can set the punch cut times through touch screen,and the maintenance time of the cutter time etc.|
|Storage Module||Can store 50 sets of programs|
|Operating System||Chinese and English operation interface|
|Touch Screen||WEINVIEW 7inch Touch Screen|
|Fiber Optic Sensor||Daochuan Sensor|
1. The air intake adopts 40u+10u two-stage filtration and automatic drainage to ensure clean air source and extend the life of pneumatic components. Keep the air source of the booster cylinder clean and prolong its service life.
2. Using Taiwan AIRTAC solenoid valve, reliable quality.
Electronic Control Part
1. The integrated module board is adopted, which is easy to maintain, and the wiring terminal is protected by an acrylic cover, which conforms to safety regulations.
2. All signal wires in the machine have a line code. When the machine fails, the corresponding code will appear for easy maintenance.