High Efficient 50L PCBA Dust Collector HEPA PCB Cleaning Machine
High-Efficient PCB Circuit Board Upper Dust Collector for PCB Separator
PCBA Dust Collector Features
| Has powerful capability of absorbing dust from the upper side. |
| Equipped with air outlet switching device to increase dust collecting air volume. |
| High efficiency motor and fan, low noise, set |
| Dust efficiency is good. |
| Straight barrel filter bag, dust after cutting and |
| The debris was collected centrally after being beaten |
PCBA Dust Collector Specifications
| ITEM |
PCBA Dust Collector TS300 |
|---|---|
| Power supply | AC 380V/(220V)50/60 Hz 3 Phase |
| Output power | 3KW(4HP) |
| Air-intake flow volume | 144m3/h |
| Air-intake speed | 20m/s |
| Air-intake caliber | D 50mm |
| Air-vent caliber | D 125mm |
| Filter tube's material | Polyester |
| Filter bag's grade | HEPA |
| Filter tube's size | 710*950mm |
| Collector's capacity | 50L |
| Dynamo protection grade | IP54 |
| Noise | <76db |
| Weight | 110kg |
| Dimensions(W*D*H) | 1051*538*969mm |
PCBA Dust Collector Advantages:
1. the upper collection of dust suction port is concentrated in one point, the suction is more concentrated, can prevent the dust from spreading to the workshop environment pollution, at the same time to prevent the employee occupational disease;
2. There is no need to do secondary dust removal to ensure the yield of the product and save manpower.
PCBA Dust Collector Disadvantages:
1, Dust from the upper suction will be easier to enter the spindle, will speed up the loss of the spindle;
2, The consumption of milling cutter will be more than the next dust collection structure (not like the next dust collection milling cutter application segment used four to five times);
