SMT SMA Connector 4HP PCBA Dust Collector For PCB Depaneling Equipment
SMT SMA Connector PCB Circuit Board Upper Dust Collector for PCB Separator
PCBA Dust Collector FEATURES
1. Has powerful capability of absorbing dust from the upper side.
PCBA Dust Collector Appliance
Equipped with PCBA separator.
PCBA Dust Collector Attention
The explosion-proof dust collector is an option.
The dust collector’s noise is measuring away 1M from machine, the actual environment’s noise will influence this data.
PCBA Dust Collector Specification
|ITEM||PCBA Dust Collector TS300|
|Power supply||AC 380V/(220V)50/60 Hz 3 Phase|
|Air-intake flow volume||144m3/h|
|Air-intake caliber||D 50mm|
|Air-vent caliber||D 125mm|
|Filter tube's material||Polyester|
|Filter bag's grade||HEPA|
|Filter tube's size||710*950mm|
|Dynamo protection grade||IP54|
APCBA Dust Collector dvantage:
1, the upper collection of dust suction port is concentrated in one point, the suction is more concentrated, can prevent the dust from spreading to the workshop environment pollution, at the same time to prevent the employee occupational disease;
2. There is no need to do secondary dust removal to ensure the yield of the product and save manpower.
PCBA Dust Collector Disadvantage:
1, dust from the upper suction will be easier to enter the spindle, will speed up the loss of the spindle;
2, the consumption of milling cutter will be more than the next dust collection structure (not like the next dust collection milling cutter application segment used four to five times);