AC Servo Motor PCB Depaneling Machine
Handy Operation System PCB Cutting Machine PCB Depaneling Equipment
Product Descriptions:
Equipped with high-speed CCD vision alignment system in all series of products to enhance the precision in cutting and efficiency in operation.
Use high speed spindle with small cutting stress to precisely cut any shape of PCBA.
Provide dual worktables for placing the cutting PCB in parallel to enhance the efficiency of opration.
Patented dust collector with low noise and high efficiency.easy to clean and maintain.
Operation system:adopts Lenovo+Windows10.
Software:Genitec independent research and development control system supports unlimited ungrade
Product Application:
1. Equipped with high efficient vision-aided position alignment system with high-speed CCD camera in all product series .Especially desinged for high-precision and high-production PCB cutting process.
2. Suitable for de-paneling small-sized PCB for cell phone ,digital camera,GPS device,and PDA ,etc.
3. Can choose either standard fixture or customized fixture for PCB cutting to help increasing the production volume.
4. Provide dual worktables so that placing and cutting PCB can be performed simultane-ously to minmize the waiting time.
Specification
| ITEM | ZM320 |
| Valid Cutting Area | 350*300mm |
| Cutting Function | Tweening to Line,L-Shape,U-shape,Circle,Arc |
| Process Table | Dual Tables |
| Repeat Precision | ±0.01mm |
| Cutting Precision | ≦±0.05mm |
| Max.Moving Speed | XY:1000mm/sec,Z:500mm/sec |
| Max.Moving Trip | X:810mm,Y:370mm,Z:90mm |
| Spindle Speed | MAX60,000rpm |
| Voltage/Power Requirement | AC220V 50/60HZ 2.2KW Single Phase |
| Cutting Speed | 1-100mm/s Adjustable |
| Operation System | Windows10 |
| Program Teaching Method | Intuitive Teaching by CCD Color Image Input |
| Program Backup | USB |
| Control Method | Precision Multi-axis Control System |
| XYZ-Axis Driving Mode | AC Servo Motor |
| Size of Millng Bit | φ0.8-3.0mm |
| Machine Dimension | 1245w*1315D*1550H(mm) |
| Machine Weight | 500KG |
| Dust Collector | TS200 |
Operation Interface
Nine Functions
F1: User Permission
F2: Setting board thickness,Milling bit specification and life cycle and fixture height.
F3: Mark setting and revising
F4: Cutting Program Edit
F5: the cutting path simulation
F6: Milling bit working height setting
F7: Milling bit drilling center correction
F8: Environment,Working,Permission Setting
F9: Reset
Hisotry Record
After the power on, all operation procedures and machine alarm records are saved in real time, and the whole operation process can be traced back. 500G hard disk saves data.
Function parameter interface
User-friendly operation interface ,easy to set parameters.
Four Levels Password Setting
Provide four levels of authorization control according to user's job rank.
