Anode Plating 0.6MP 8mm PCB V Cut Machine With Stepper Motor
Small-Size PCBA V-Cut Machine PCB Router Machine With XINJIE PLC ZM30-A
PCB V Cut Machine Introduction
1. There is a dust collecting tray under the cutter die.
2. Microcomputer control,human-machine interface.
3. It is suitable for all PCBA with V-slot.
4. It's quick and time-saving to change products,
just need to change the cutter die.
5. A variety of security control modes:structural foolproof,light curtain control,software control.
6. It can be connected to the assembly line to achieve full-automatic without the need for manual placement. The splitted PCBAs flow out through the assembly line.
7. Data monitoring system: startup time monitoring, capacity monitoring, fault monitoring, etc.
8. PCB/FPC separation expert.Cutting thickness rang 0.4mm-3.5mm.
9. The working method: feeding by the PCBA Loader or manually to the assembly line --- sucking PCBA onto the machine platform --- the machine will split the PCBA --- after the separation is completed, the products and waste are absorbed onto the assembly line and flowed away.
PCB/FPC separation expert.Cutting thickness rang 0.4mm-3.5mm.
10. The working method: feeding by the PCBA Loader or manually to the assembly line --- sucking PCBA onto the machine platform --- the machine will split the PCBA --- after the separation is completed, the products and waste are absorbed onto the assembly line and flowed away.
PCB V Cut Machine Specifacation
|Machine name||PCB V-solt separator|
Machine Supply Requirements
|Environmental requirements||Clean and dry environment, avoiding humidity or high temperature|
|Working pressure / pipe diameter||≥0. 6MP/8mm|
|Minimum distance between part and cutting line||≥1.5mm|
|Max./Min. cutting length||300mm*300mm 12mm*12mm|
|PCB Inlet adjustment||Front side fixation, rear side movement adjustment|
|Max.Components on the PCBA||PCB Max.height (Reverse side ) :20mm,Max.height (Front side) :35mm|
Machine Software Part
|Parameter setting||Direct input by touch screen according to the size of the V-slot|
|Storage Module||Store 50 sets of programs|
|Touch Screen||WEILUN Touch Screen|
|Fiber Optic Sensor||Omron|
|Cutter||Blade||High speed steel knife imported from Japan|
|Usage life||5000000 times|
|Die precision||0. 1mm|
|Main Control System||Cutting speed||15s/pcs(200*150mm) standard speed 8 cuts for reference|
|Stepping Motor /Server||Yamano / Panasonic|
|Guide screw||HIWIN guide screw|
|Assembly line MAX.Length and Width||650mm*250mm(can be customized)|
|Suction mechanical hand motion control mode||Stepper motor + rail + belt drive|
|Dust collection method and power||Die Lower dust collector 1500W|
|Cutting thickness||0. 4-3. 5mm|
|Other Function||Misoperation protection||Light curtain, sensor and software triple protection|
|Surface treatment of parts||Anode plating|
|Security Protection||Emergency Stop|
|Power off and air off function||Have|
|Self-detection function||Start-up time monitoring, capacity monitoring, machine failure information and automatic rejection system|
|Machine main parts||PCB Loader Machine (assembly line), Suction cup, Three-axis mobile cutting platform, Dust collector|
|Working Method||Auto mechanical hand online cutting PCB and deliver PCB|
|Application||Bidirectional V-groove for PCB board after plug-in / SMD|