Liner Type 800 Pcs/Hour PCB V Cut Machine With Multi Continuous Cutting Method
Liner Type PCBA V-Cut Machine PCB Separator CNC Router Machine ZM30-L
PCB V Cut Machine Characteristics
1. PCB V Cut Machine adopts a unique multi-continuous cutting method. The Circuit board are completely splitted by six blades, the upper and lower blade are a group to form a cutting unit, they Are A, B, C groups.The whole cutting process is divided into three parts. The A-group blade cuts the PCB 40% first, then the B-blade again runs through the slot cut by the A-blade, and again completes 40% of the cutting amount, and finally the C-group blade cuts the last 20% , because each time the amount of cutting is small, the stress generated during the cutting process is reduced by more than 80% compared with the traditional one-time cutting method. The edge of the divided circuit board is smooth, and the board surface is very flat.
It is the only machine on the market that can guarantee the deformation of the aluminum board after cutting.
2. Due to the multiple cutting, the cutting process is very smooth, greatly improving the positioning ability of the V-CUT groove. Even if the Circuit board V-CUT groove is very shallow,will not jump out of the V-cut groove guiding knife. Avoid bad boards.
3. Due to the small cutting force of the blade and the high-speed steel material imported from Sweden, the durability of the blade is greatly improved, and the blade life can be more than one year.
4. All cutting blades are calibrated with a stimulating dual-frequency laser interferometer to ensure that the second knife continue to cut accurately in the V-groove after the fist knife cut. The tip of the knife jumps no more than 0.02mm. Ensure the perfect cutting quality.
PCB V Cut Machine Specifacation
|Splitting Length||Infinite length|
|the splitting thickness||0.5~3mm|
|Use Scope||Aluminum plate,Copper Plate,FR1～4,FR-4|
|Feeding board speed||0~300mm/S|
|Main machine dimension||800mm(L)*370mm(W)*240mm(H)|
|Whole working platform size||2600mm(L)*370mm(W)*240(H)|
|Blade material||Japan SKH high speed steel|
|Working capacity/hour||800 pcs|