Single Phase 50Hz Automatic Solder Paste Printer SMT Production Line
Producy Options Configuration
1. The rest of solder paste on the stencil monitoring system
The solder paste inspection sensor before the scraper below remaining paste rolling diameter, intelligent prompt customers to join the solder paste.
2. Automatic supply solder paste function
General solder paste pot add directly.
Can be added at a fixed times.
3. SPI close loop
From a closed loop system with SPI on line, when after receiving the SPI printing bad feedback, the machine will automatically adjust automatically according to the offset of SPI feedback, x,y direction deviation can automatically adjust to complete, and automatic cleaning stencil, improve printing quality and production efficiency, form a complete printing feedback system.
4. UPS power off protection
After power off a certain time (10minutes) PC can keep the power supply, the protection of production data.
5. Stencil hole inspection
Realization of plugging hole, hint whether clean steel net, steel net detect 2 consecutive failure, prompt the customer whether to replace cleaning mode, the frequency or manual cleaning.
6. Magnetic scraper
The absorption blade, replace the screw positioning, convenient and quick.
7. Temperature can be shown and adjustable on the overhead control system.
Temperature can be shown and adjustable on the external control system.
8. Industry 4.0
Production analysis and real-time statistical information function operation.
Alarm intelligent prompt system and processing solutions.
9. Bar code recognition function
Accept one dimensional code or two dimensional code on the customer's PCB board, also record the relevant information. It can be shared with MES system and satisfied two types of scan ports.
Automatic scan (support for printing surface with bar code).
10. Automatic dispensing function
It can realize dot, area filling the pount.
11. Manufacturing Execution System
Custom different communication modes of customers and realize intelligent operation management.
SMT Production Line Specification
SMT Production Line
|Printing Accuracy||≥2 CPK@±23μm@|
|Repeeat Position Accuracy||≥2 CPK@±10μm@|
|Maximum Print Area||400mm(X)*340mm(Y)|
|Screen Frame Size||470mm*370mm~737mm*737mm|
|Screen Frame Thickness||20mm-40mm|
|Separation option||Separation after sqyeegee up; squeegee up after separation|
|Apply paste option||solder paste, printing ink, silver paste|