PCB Auto Optical Inspection Machine Motor AOI Machine Single Track Servo 600mm/S
1 set
MOQ
USD1500-100000
Price
PCB Auto Optical Inspection Machine Motor AOI Machine Single Track Servo 600mm/S
Features Gallery Product Description Request A Quote
Features
Basic Infomation
Place of Origin: China
Brand Name: Genitec
Certification: CE
Model Number: AOI-05
High Light:

600mm/s Auto Optical Inspection Machine

,

PCB Auto Optical Inspection Machine

,

Servo Motor Aoi Inspection Machine

Payment & Shipping Terms
Packaging Details: Vacuum packed in wooden cases
Delivery Time: 30-45 days
Payment Terms: L/C, T/T, Western Union, MoneyGram
Supply Ability: 500 sets/Month
Specifications
Product Name: AOI Machine
Host: ADLINK
CPU: I7
Memory: 8-32G
Top Speed: X/Y/Z:=600mm/s;
Mechanical hard disk: 1TB+256G SSD
Light Source: RGB Tricolor Ring LED Light Source
Weight: 700KG
Product Description

PCB Auto Optical Inspection Machine Motor AOI Machine Single Track Servo 600mm/S

 

AOI Machine Specification

Project AOI Machine Categories Model
Detecting System Detction project Miss parts,missing tin,short circuit,false welding,wrong parts,extremely reverse, monument,reverse type,etc.
Detction element The Chip element(more than 01005),IC(0.3mm)=pitch),foot FPCB components etc.
Checkable size L520*W460mm
Optical system Detectrion method Template matching,luminance extraction,luminance average,brightness minimum,brightness maximum color extraction,circular detection Character detection,offset detection,angle detection,etc.
Detecion camera 1 set of high-definition color camera, HIKVISION or Basler (5 million pixels,Standard,Optional higher pixels)
light source 1 set of RGB circular multi-angle LED light source.
Camera lens 1 set of high-definition telecentric lenses, DOF: 4mm
Resolution 15μm Standard(10μm,20μm Optional)
Slftware
Function
Signal clmmunication Provide corresponding upstream and downstream signal interface/support 4.0 networking MES system/support NGbuffer system.
Mark point Multiple Mark points can be set to support multiple mark points of collage and support for Bad Mark points.
Exension functon CAD data function,double side automatic identification and detection,jump test,bar code automatic identification,SPC statistical function,support for ShopFloor system etc.
FOV According to the degree of analysis, are respectively:42*30mm2(10μm);52*40mm2 (15μm);65*52mm2(20μm)
Selection off-line system and maintenance station system
Industrial control host Host ADLINK
CPU i7
Memory 8-32G(Optional)
Mechanical hard disk 1TB+256G SSD
Display 22inch LED display
Mechanical System Dimensions L1140*W1080*H1550mm
PCB Thickness 0.3-8.0mm(PCB bending:≤3mm)
PCB element heihth Upper 30mm Lower 30mm
Drive equipment Panasonic servo motor
Motion system High precision screw + linear double guide rails
Positioning accuraey ≤10μm
Transport track PCB standard track
Track height 900±30
Morving speed Max.700mm/sec
Power Supply AC220V 50HZ 1800W
Environmental requirements Temperature:2~45℃, relative humidity 25%-85%(frost free)
Weight 700KG

PCB Auto Optical Inspection Machine Motor AOI Machine Single Track Servo 600mm/S 0

Genitec AOI Machine Description:

 

To inspect defects of solder joint of plug-in components and SMT components on the bottom side

Core Advantages

·Optional three-section track design.

·High speed, high precision and low wear.

·AI algorithm. Quick location and easy programming.

·Strong inspection capability.

·Flexible combination with production line and applicable for multiple

scenarios.

·Traceable data and support SPC alarm.

·Automatic cleaning function for lens.

 

Off-line/In-line optional
Freely switch between single-point/multiple-point cursor guide.
High alignment accuracy
Whole PCB projection guide maintenance personnel to repair quickly
Avoid manual searching.
Support operation on multiple work station.
Enhance repair efficiency
Multiple guide colors for selection. Avoid interference by board color
Guide by areas.
Higher working efficiency

 

  • 1993 Genitec Technology Co. LTD was established.
  •  
  • 1995 Focused on developing machinery equipment for electronics industry.
  •  
  • 1997 started mass production of machinery equipment for electronic industry. Extended business scale to cover the development of PCB machinery equipment for the production line.
  •  
  • 1998 Spent tremendous efforts on R&D, GENITEC successfully transformed to became a high-tech designer and manufacturer of machinery equipment.
  •  
  • 2001 Received grant of "Outstanding Research and Develpmeny in innovatice technologirs" awarded by Ministry of Ecnomoic Affairs. ISO9001 was certificated.
  •  
  • 2002 Expanded business operation. Grand opening of new head office and plant. Built a modern plant in East China. Set up distribution points in South China.
  •  
  • 2015 Set long-term plan to cope with the trend of "International Division of Labor". Moved wowards the goal of "sustainable development and operation".
  •  
  • 2020 Provided in-line and off-line total solution for AOI Machine manufacturing process. Launched a series of automated equipment for PCBA separation manufacturing process in the market.
Recommended Products
Get in touch with us
Tel : +86-13929264317
Fax : 86-0769-82855028
Characters Remaining(20/3000)